Ricoh MPC 2800 AT-C2 Mode D'emploi page 576

8. Appendix: SP Mode Tables
013 Paper Transfer: Thick 1: 1st Side: S4
014 Paper Transfer: Thick 1: 2nd Side: S4
017 Paper Transfer: Thick 1: 1st Side: S5
018 Paper Transfer: Thick 1: 2nd Side: S5
[Thick 1: Leading Edge Correction] Thick 1 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2502 and SP2507 are multiplied by these SP values.
2521
Thick 1 and Thick 2&Fine: 77 mm/sec
8
• The paper leading edge area can be adjusted with SP2522.
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
005 Separation DC: Thick 1: 1st Side
006 Separation DC: Thick 1: 2nd Side
[Thick 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2522
paper leading edge between the erase margin area and the image area.
Thick 1 and Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
208
275 mm ≥ S3 size ≥ 210 mm (Paper
width)
[100 to 600 / 115 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper
width)
[100 to 600 / 190 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper
width)
[100 to 600 / 120 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
[100 to 600 / 220 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG