Ricoh MPC 2800 AT-C2 Mode D'emploi page 662

8. Appendix: SP Mode Tables
Display units (mm or inch) for custom paper sizes.
001 0:mm 1:inch
[Accounting Counter]
Selects the counting method.
5045
NOTE: The counting method can be changed only once, regardless of whether the counter
value is negative or positive.
001 Counter Method
[Paper Display]
5047
Turns on or off the printed paper display on the LCD.
001 -
8
[Toner Refill Detection Display]
5051
Enables or disables the toner refill detection display.
5051 1 Toner Refill Detection Display
[Display IP Address]
5055
Display or does not display the IP address on the LCD.
001 -
[Coverage Counter Display]
5056
Display or does not display the coverage counter on the LCD.
294
0: mm (Europe/Asia)
*CTL
1: inch (USA)
[0 or 1 / 0 / - ]
*CTL 0: Developments
1: Prints
[0 or 1 / 0 / - ]
*CTL
0: OFF, 1: ON
[0 or 1 / 0 / - ] Alphanumeric
*CTL 0: ON
1: OFF
[0 or 1 / 0 / - ]
*CTL
0: OFF 1: ON