Ricoh MPC 2800 AT-C2 Mode D'emploi page 494

6. Appendix: Jam Detection
Jam Code SP Display
7504 104 -
Finisher Tray Lift Motor
7504 105
(B408)
Finisher Jogger Motor
7504 106
(B408)
6
Finisher Shift Motor
7504 107
(B408)
Finisher Staple Motor
7504 108
(B408)
7504 109 Finisher Exit Motor (B408)
Finisher Entrance: EUP
7504 191
(B804/B805)
Finisher Proof Exit: EUP
7504 192
(B804/B805)
Finisher Shift Tray Exit:
7504 193
EUP (B804/B805)
126
Description
-
Stack height sensor does not detect paper after
the lower tray has lifted up.
Stack height sensor still detects paper after the
lower tray has lifted down.
Jogger fence HP sensor does not turn off after
the jogger fence has moved from its home
position.
Jogger fence HP sensor does not turn on after
the jogger fence has returned to its home
position.
Shift roller HP sensor does not turn off after the
shift roller has moved from its home position.
Shift roller HP sensor does not turn on after the
shift roller has returned to its home position.
Stapler HP sensor does not turn off after the
stapler has moved from its home position.
Stapler HP sensor does not turn on after the
stapler has returned to its home position.
Stack feed-out belt HP sensor does not turn off
after the stack feed-out belt has moved from its
home position.
Stack feed-out belt HP sensor does not turn on
after the stack feed-out belt has returned to its
home position.
Paper does not reach the finisher entrance
sensor or stays at the finisher entrance sensor.
Paper does not reach the proof tray exit sensor
or stays at the proof tray exit sensor.
Paper does not reach the upper tray exit sensor
or stays at the upper tray exit sensor.
LCD
Display
-
R1-R2
R3-R5
R1-R2
R3-R5
R3-R5
R1-R4
R1-R4
R1-R4