Ricoh MPC 2800 AT-C2 Mode D'emploi page 715

• This SP is activated only when SMTP authorization is enabled by UP mode.
S/MIVE: MIME Header
026
Setting
5866 [E-mail Alert] Not Used
001 Report Validity
005 Add Date Field
5870 [Common Key Info Writing]
001 Writing
003 Initializing
5873 [SD Card Appli Move]
001 Move Exec
002 Undo Exec
Selects the MIME header type of an E-mail sent
by S/MIME.
[0 to 2 / 0 / 1]
-
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
Enables or disables the e-mail alert.
*CTL [0 or 1 / 0 / – ]
0: Enable, 1: Disable
Adds or does not add the date field to the header
of the alert mail.
*CTL
[0 or 1 / 0 / – ]
0: Not added, 1: Added
Writes to flash ROM the common proof for
*CTL
validating the device for @Remote specifications.
Initializes the data area of the common proof for
*CTL
validating.
This SP copies the application programs from the original SD card in
SD card slot 3 to an SD card in SD card slot 1 or 2 (slot 1 has the
priority to be copied).
This SP copies back the application programs from an SD card in SD
Card Slot 3 to the original SD card in SD card slot 1 or 2 (slot 1 has
the priority to be copied). Use this menu when you have mistakenly
copied some programs by using "Move Exec" (SP5873-1).
System Service Mode
8
347