Ricoh MPC 2800 AT-C2 Mode D'emploi page 642

8. Appendix: SP Mode Tables
Sub Scan Magnification
001
Adjustment
[Leading Edge Registration Adjustment]
4010
Adjusts the leading edge registration by changing the scanning start timing in the sub-scan
direction.
001
[Side-to-Side registration Adjustment]
4011
Adjusts the side-to-side registration by changing the scanning start timing in the main scan
direction.
001 -
[Scanner Erase Margin: Scale] Scanner: Erase Margin: Scale
4012
Sets the blank margin at each side for erasing the original shadow caused by the gap
between the original and the scale.
001 Book: Leading Edge
8
002 Book: Trailing Edge
003 Book: Left
004 Book: Right
005 ADF: Leading Edge
007 ADF: Right
008 ADF: Left
[Scanner Free Run]
4013
Performs the scanner free run with the exposure lamp on or off in the following mode.
Full color mode / Full Size / A3 or DLT
001 Lamp: ON
002 Lamp: OFF
274
*ENG [-1.0 to 1.0 / 0 / 0.1%/step] FA
*ENG [-2.0 to 2.0 / 0 / 0.1 mm/step] FA
*ENG [-2.5 to 2.5 / 0 / 0.1 mm/step ] FA
*ENG [0 to 3.0 / 0 / 0.1 mm/step ] FA
*ENG [0 to 3.0 / 0 / 0.1 mm/step ] FA
[0 or 1 / 0 / - ]
*ENG
0: OFF, 1: ON