Ricoh MPC 2800 AT-C2 Mode D'emploi page 711

211 Setting: LogType: Job2
212 Setting: LogType: Access
213 Setting: Primary Srv
214 Setting: Secondary Srv
215 Setting: Start Time
216 Setting: Interval Time
217 Setting: Timing
5849 [Installation Date]
5849 1 Display
5849 2 Switch to Print
003 Total Counter
5850 [Address Book Function]
Replacement of Circuit Classification Japan Only
The machine is sold ready to use with a G3 line. This SP allows you to switch all at once
003
to convert to G4 after you add a G4 line. Conversely, if for some reason the G4 line
becomes unusable, you can easily switch back to G3.
[Bluetooth Mode]
5851
Sets the operation mode for the Bluetooth Unit. Press either key.
[0:Public] [1: Private]
[Stamp Data Download]
5853
*CTL -
The "Counter Clear Day" has been changed to
"Installation Date" or "Inst. Date".
Determines whether the installation date is printed on
the printout for the total counter.
[0 or 1 / 1 / - ]
0: OFF (No Print)
1: ON (Print)
-
*CTL -
System Service Mode
8
343