Ricoh MPC 2800 AT-C2 Mode D'emploi page 581

[OHP: Bias]
2601
Adjusts the DC voltage of the discharge plate for OHP.
001 Separation DC
[OHP: Bias: BW]
2603
Adjusts the current for the paper transfer roller for OHP in black-and-white mode.
001 Paper Transfer
[OHP: Bias: FC]
2608
Adjusts the current for the paper transfer roller for OHP in full color mode.
001 Paper Transfer
[OHP: Paper Size Correction]
2611
Adjusts the size correction coefficient for the paper transfer roller current for each paper size.
SP2603 and SP2608 are multiplied by these SP values.
001 Paper Transfer: S1
002 Paper Transfer: S2
003 Paper Transfer: S3
004 Paper Transfer: S4
005 Paper Transfer: S5
[OHP: Leading Edge Correction] OHP: Leading Edge Correction
2621
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2603 and SP2608 are multiplied by these SP values.
*ENG [0 to 4000 / 1000 / 10 –V/step]
*ENG [0 to 250 / 12 / 1 –μA /step]
*ENG [0 to 250 / 15 / 1 –μA /step]
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 140 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Paper width)
[100 to 600 / 200 / 5%/step]
*ENG
275 mm ≥ S3 size ≥ 210 mm (Paper width)
[100 to 600 / 260 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper width)
[100 to 600 / 330 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
System Service Mode
8
213