Ricoh MPC 2800 AT-C2 Mode D'emploi page 619

002 (+)Consumption: M
003 (+)Consumption: C
004 (+)Consumption: Y
005 (-)Consumption: Bk
006 (-)Consumption: M
007 (-)Consumption: C
008 (-)Consumption: Y
009-012 Threshold for development gamma rank.
009 P Rank 1 Threshold
010 P Rank 2 Threshold
011 P Rank 3 Threshold
012 P Rank 4 Threshold
013-014 Threshold for image density rank on the image transfer belt.
013 T Rank 1 Threshold
014 T Rank 2 Threshold
3241 [Background Potential Setting]
001 Coefficient: Bk
002 Coefficient: M
003 Coefficient: C
004 Coefficient: Y
005 Offset: Bk
006 Offset: M
007 Offset: C
008 Offset: Y
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [0 to 2 / 0.2 / 0.1 /step]
*ENG [0 to 2 / 0.1 / 0.1 /step]
*ENG [-2 to 0 / -0.1 / 0.1 /step]
*ENG [-2 to 0 / -0.2 / 0.1 /step]
*ENG [-1 to 0 / -0.2 / 0.01 V/step]
*ENG [0 to 1 / 0.2 / 0.01 V/step]
*ENG These are parameters for calculating the charge
bias referring to the development bias at process
*ENG
control.
*ENG [-1000 to 1000 / 0 / 1 /step]
DC charge bias = Development bias x (1 + 0.001
*ENG
x these vales) + SP3-241-005 to -008
*ENG These are additional values for calculating the
charge bias referring to the development bias at
*ENG
process control.
[0 to 255 / 140 / 1 V/step]
*ENG
DC charge bias = Development bias x (1 + 0.001
*ENG
x SP3-241-001 to -004) + these values
System Service Mode
8
251