Ricoh MPC 2800 AT-C2 Mode D'emploi page 580

8. Appendix: SP Mode Tables
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 2: Trailing Edge Correction] Thick 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2553 and SP2558 are multiplied by these SP values.
2573
• The paper trailing edge area can be adjusted with SP2574.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 2: Trailing Edge Correction]
2574
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
8
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
2580 [Thick 2 Environment Correction]
001 Separation DC: 1st Page
002 Separation DC: 2nd Page
003 Paper Transfer: BW: 1st Side
004 Paper Transfer: BW: 2nd Side
005 Paper Transfer: FC: 1st Side
006 Paper Transfer: FC: 2nd Side
212
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
[1 to 60 / 22 / 1 /step]
*ENG
*ENG
[0 to 60 / 11 / 1 /step]
*ENG
*ENG [1 to 60 / 53 / 1 /step]
*ENG [1 to 60 / 11 / 1 /step]