Ricoh MPC 2800 AT-C2 Mode D'emploi page 585

Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Page
003 Paper Transfer: 2nd Side
004 Separation DC: 2nd Page
[Thick 3: Trailing Edge Correction] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2651 and SP2652 are multiplied by these SP values.
2656
• The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: Thick 3: 1st Side
002 Paper Transfer: Thick 3: 2nd Side
003 Separation DC: Thick 3: 1st Page
004 Separation DC: Thick 3: 2st Page
[Thick 3: Trailing Edge Correction]
2657
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 3: Environment Correction] Thick 3 Paper: MM Environment Coefficient Adjustment
2660
Adjusts the environment coefficient for each mode. When the environment is detected as
MM, SP2651 and SP2652 are multiplied by these SP values.
001 Separation DC: 1st Page
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
[1 to 60 / 22 / 1 /step]
System Service Mode
8
217