Ricoh MPC 2800 AT-C2 Mode D'emploi page 706

8. Appendix: SP Mode Tables
Enables or disables the prevention function for the continuous data sending error.
[0 to 1 / 0 / -]
0: Disable, 1: Enable
5846 [UCS Settings]
Machine ID (For Delivery Server)
Displays the unique device ID in use by the delivery server directory. The value is only
001
displayed and cannot be changed. This ID is created from the NIC MAC or IEEE 1394
EUI. The ID is displayed as either 6-byle or 8-byte binary.
Machine ID Clear (For Delivery Server)
Clears the unique ID of the device used as the name in the file transfer directory. Execute
002
this SP if the connection of the device to the delivery server is unstable. After clearing the
ID, the ID will be established again automatically by cycling the machine off and on.
Maximum Entries
Changes the maximum number of entries that UCS can handle.
003
If a value smaller than the present value is set, the UCS managed data is cleared, and the
data (excluding user code information) is displayed.
8
Delivery Server Retry Timer
006
Sets the interval for retry attempts when the delivery server fails to acquire the delivery
server address book.
Delivery Server Retry Times
007
Sets the number of retry attempts when the delivery server fails to acquire the delivery server
address book.
Delivery Server Maximum Entries
008
Sets the maximum number account entries of the delivery server user information managed
by UCS.
LDAP Search Timeout
010
Sets the length of the timeout for the search of the LDAP server.
020 WSD Maximum Entries
338
*CTL -
Displays ID
Clears ID
[2000 to 20000/ 2000 /1 /step]
[1 to 255 / 60 / 1 /step]
[5 to 250 / 250 / 1 /step]
[0 to 255 / 0 / 1 /step]
[0 to 255 / 0 / 1 /step]
[2000 to 50000 / 2000 / 1/
step]