Ricoh MPC 2800 AT-C2 Mode D'emploi page 583

001 Separation DC
002 Paper Transfer: BW
003 Paper Transfer: FC
[Thick 3: Bias]
2650
Adjusts the DC voltage of the discharge plate for thick paper 3.
001 Separation DC: 1st Page
002 Separation DC: 2nd Page
[Thick 3: Bias: BW]
2651
Adjusts the current for the paper transfer roller for thick paper 3 in black-and-white mode.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
[Thick 3: Bias: FC]
2652
Adjusts the current for the paper transfer roller for thick paper 3 in full color mode.
001 Paper Transfer: Thick 3: 1st Side
002 Paper Transfer: Thick 3: 2nd Side
[Thick 3: Paper Size Correction]
2653
Adjusts the size correction coefficient for the paper transfer roller current for each paper size.
SP2651 and SP2652 are multiplied by these SP values.
Paper Transfer: Thick 3: 1st
001
Side: S1
Paper Transfer: Thick 3: 1st
002
Side: S2
Paper Transfer: Thick 3: 1st
003
Side: S3
*ENG [1 to 60 / 22 / 1 /step]
*ENG [1 to 60 / 11 / 1 /step]
*ENG [1 to 60 / 1 / 1 /step]
*ENG
[0 to 4000 / 1000 / 10 –V/step]
*ENG
*ENG [0 to 250 / 10 / 1 –μA /step]
*ENG [0 to 250 / 12 / 1 –μA /step]
*ENG [0 to 250 / 11 / 1 –μA /step]
*ENG [0 to 250 / 15 / 1 –μA /step]
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 100 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Paper width)
[100 to 600 / 100 / 5%/step]
*ENG
275 mm ≥ S3 size ≥ 210 mm (Paper width)
System Service Mode
8
215