Ricoh MPC 2800 AT-C2 Mode D'emploi page 659

4806 [Carriage Save]
001 -
4807 [SBU Test Pattern Change]
001 -
4808 [Factory Setting Input]
002 Execution Flag
[ACC Data Display]
This SP outputs the final data read at the end of ACC execution.
4902
A zero is returned if there was an error reading the data.
[0 to 255 / 0 / 1 /step]
001 R DATA1
002 G DATA1
003 B DATA1
004 R DATA2
005 G DATA2
006 B DATA2
4904 [Scanner IPU Board Test]
001 Test1
Moves the carriage from the scanner home
position.
-
Dust may fall through the DF exposure glass.
Therefore, do this SP when you transport the
machine a long distance.
[0 to 255 / 0 / 1 /step]
1: Grid pattern
- 2: Gradation main scan
3: Gradation sub scan
4 to 250: Default (Scanning Image)
- [0 to 255 / 0 / 1 /step]
*ENG Photo C Patch Level 1 (8-bit)
*ENG Photo M Patch Level 1 (8-bit)
*ENG Photo Y Patch Level 1 (8-bit)
*ENG Photo C Patch Level 17 (8-bit)
*ENG Photo M Patch Level 17(8-bit)
*ENG Photo Y Patch Level 17 (8-bit)
Bit0: TAURUS register
-
Bit1: ORION register
System Service Mode
8
291