Ricoh MPC 2800 AT-C2 Mode D'emploi page 509

009 Paper Tray2/3/4/5/LCT: Thick 1 *ENG
012 By-pass: Plain
013 By-pass: Middle Thick
014 By-pass: Thick 1
018 Duplex: Plain
019 Duplex: Middle Thick
020 Duplex: Thick 1
021 Paper Tray1: Plain: 1200
022 Tray1: Middle Thick: 1200
023 Tray 2/3/4/5LCT: Plain: 1200
024 Tray 2/3/4/5LCT: Mid: 1200
025 By-pass: Plain: 1200
026 By-pass: Middle Thick: 1200
030 Duplex: Plain: 1200
031 Duplex: Middle Thick: 1200
1007 [By-Pass Size Detection] By-Pass Size Detection Display
LG
001
Enables or disables the automatic paper size detection function of the by-pass tray.
This SP determines what paper size the machine detects if the detected size is less than 8.5".
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1101 [Flicker Control]
Flicker Control
001
Enables or disables the flicker control function.
[–9 to 5 / -2 / 1 mm/step]
*ENG
[–9 to 5 / 0 / 1 mm/step]
*ENG
*ENG [–9 to 5 / -2 / 1 mm/step]
*ENG
[–9 to 5 / 0 / 1 mm/step]
*ENG
*ENG [–9 to 5 / -2 / 1 mm/step]
*ENG
*ENG
*ENG
[–9 to 5 / 0 / 1 mm/step]
*ENG
*ENG
*ENG
*ENG
[–9 to 5 / 0 / 1 mm/step]
*ENG
[0 or 1 / 0 / 1 ]
*ENG
0: OFF, 1: ON
[0 or 1 / 0 / 1 /step]
*ENG 0: Flicker Control: OFF
1: Flicker Control: ON
System Service Mode
8
141