Sc8Xx: Overall System - Ricoh MPC 2800 AT-C2 Mode D'emploi

No. Type
500-sheet finisher: Tray lift motor error
• Motor overload
798 • Loose connection of the shift tray motor
B
-08 • Defective shift tray motor
1. Check the connections to the tray lift motor.
2. Replace the tray lift motor.
No. Type
Stack pressure solenoid error
The stack pressure solenoid in the finisher is not operating.
• Solenoid harness loose, broken
• Solenoid obstructed
798
• Stack height sensor dirty, harness loose, broke
B
-09
• Solenoid defective
• Stack height sensor defective
1. Check or replace the solenoid harness.
2. Check for blockages in the stack pressure mechanism.
1. Replace the stack height sensor.

SC8xx: Overall System

No. Type
Energy saving I/O sub-system error
The energy saving I/O sub-system detects an error.
CTL
816
D
• Controller board defective
Replace the controller board.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC Tables
3
91