Ricoh MPC 2800 AT-C2 Mode D'emploi page 680

8. Appendix: SP Mode Tables
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Toner Alarm
010 Supply Automatic Ordering Call
011 Supply Management Report Call
012 Jam/Door Open Call
5516 [Individual PM Part Alarm Call]
001 Disable/ Enable Setting
5610 [Base Gamma Control Point: Command]
Factory Setting
004
Recalls the factory settings.
8
Restore
005
Overwrites the current values onto the factory settings.
Restore
006
Recalls the previous settings.
5611 [Toner Color in 2C]
B-C
001
Adjusts the Cyan correction value of the blue signal in two-color mode.
B-M
002
Adjusts the Magenta correction value of the blue signal in two-color mode.
003 G-C
312
*CTL
Enables or disables the PM part alarm call.
[0 or 1 / 1 / - ]
0: Not Send, 1: Send
- -
- -
- -
[0 to 128 / 100 / 1 /step]
*ENG
128: Darkest density
[0 to 128 / 100 / 1 /step]
*ENG
128: Darkest density
*ENG [0 to 128 / 100 / 1 /step]
1: On
-