Ricoh MPC 2800 AT-C2 Mode D'emploi page 666

8. Appendix: SP Mode Tables
5114 [Optional Counter I/F]
001 MF Key Card Extension
5118 [Disable Copying]
001 This program disables copying.
[Mode Clear Opt. Counter
5120
Removal]
This program updates the information on the optional counter. When you install or remove
001
an optional counter, check the settings.
5121 [Counter Up Timing]
This program specifies when the counter goes up. The settings refer to "paper feed" and
001
"paper exit" respectively.
8
5126 [F Size Original Setting]
001 Selects F size original setting.
5127 [APS Mode]
001 This program disables the APS.
5128 [Code Mode With Key/Card Option]
001 DFU
5131 [Paper Size Type Selection]
The program selects a paper size system from the following alternatives: the AB system (0),
001
the LT system (1), and the AF system (2).
298
[0: Not installed/ 1: Installed (scanning
*CTL
accounting)]
*CTL [0: Not disabled/ 1: Disabled]
[0: Yes (removed)/ 1: Standby (installed but not
*CTL
used)/ 2: No (not removed)]
*CTL [0: Feed/ 1: Exit]
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
*ENG
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)
*CTL [0: Not disabled/ 1: Disabled]
*CTL
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
-