Ricoh MPC 2800 AT-C2 Mode D'emploi page 656

8. Appendix: SP Mode Tables
[Black Level Fine Adj. Display]
4675
BE: Blue Even signal, BO: Blue Odd signal
001 Factory Setting: BE Color
002 Factory Setting: BO Color
[Gain Adjustment]
4677
Displays the factory setting values of the gain adjustment for Red.
8
001 Factory Setting: R Color
[Gain Adjustment]
4678
Displays the factory setting values of the gain adjustment for Green.
001 Factory Setting: G Color
[Gain Adjustment]
4679
Displays the factory setting values of the gain adjustment for Blue.
001 Factory Setting: BE Color
[Gain Adjustment]
4680
Displays the gain value of the amplifiers on the controller for Red.
001 Factory Setting: RE Color
288
signal in the CCD circuit board (color printing
speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the factory setting values of the black level
adjustment (rough adjustment) for the even blue
signal in the CCD circuit board (color printing
*ENG
speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the factory setting values of the black level
adjustment (rough adjustment) for the odd blue
signal in the CCD circuit board (color printing
*ENG
speed).
[0 to 16383 / 0 / 1 digit/step]
*ENG [0 to 7 / 0 / 1 digit/step]
*ENG [0 to 7 / 0 / 1 digit/step]
*ENG [0 to 7 / 0 / 1 digit/step]
*ENG
[0 to 1023 / 0 / 1 digit/step]