Ricoh MPC 2800 AT-C2 Mode D'emploi page 671

EU: + 60 (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
002 Time Difference
5307 [Summer Time]
Setting
001
Enables or disables the summer time mode.
• Make sure that both SP5-307-3 and -4 are correctly set. Otherwise, this SP is not
activated even if this SP is set to "1".
Rule Set (Start)
Specifies the start setting for the summer time mode.
There are 8 digits in this SP. For months 1 to 9, the "0" cannot be input in the first digit, so the
eight-digit setting for -2 or -3 becomes a seven-digit setting.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [1 to 5]
003
4th digit: The day of the week. [0 to 6 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
7th digit: The length of the advanced time. [0 to 9 / 1 hour /step]
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step]
• The digits are counted from the left.
• Make sure that SP5-307-1 is set to "1".
For example: 3500010 (EU default)
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March.
Rule Set (End)
004
Specifies the end setting for the summer time mode.
*CTL# [-1440 to 1440 / Area / 1 min./step ]
[ 0 to 1 / NA, EU, ASIA / 1 /step]
0: Disabled
-
1: Enabled
NA and EUR: 1, ASIA: 0
-
- -
System Service Mode
8
303