Ricoh MPC 2800 AT-C2 Mode D'emploi page 609

Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-004) exceed the target values (SP3611-008) by more than the specified
thresholds (SP3239-009).
[Toner Supply Type] Toner Supply Type ([Color])
3044
Selects the toner supply method type.
001 Bk
002 M
003 C
004 Y
[Toner End Detection: Set]
3045
Enables/disables the toner alert display on the LCD.
001 ON/OFF
[Toner End/Near End]
3101
Displays the amount of each color toner. DFU
001 Toner Replenishment: Bk
002 Toner Replenishment: M
003 Toner Replenishment: C
004 Toner Replenishment: Y
005-008 Displays the consumed amount of each color toner.
005 K Toner Consumption
006 M Toner Consumption
007 C Toner Consumption
008 Y Toner Consumption
*ENG [0 to 3 / 2 / 1/step] Alphanumeric
0: FIXED (with the supply rates stored with SP 3401)
*ENG
1: PID (Vtref_Fixed)
*ENG
2: PID (Vtref_Control)
*ENG
3: Not used
[0 or 1 / 0 / 1/step]
*ENG
0: Detect, 1: Not Detect
*ENG [1 to 600 / 450 / 1 g/step]
*ENG
*ENG [1 to 600 / 360 / 1 g/step]
*ENG
*ENG
*ENG
[0 to 3000 / 0 / 0.001 g/step]
*ENG
*ENG
System Service Mode
8
241