Ricoh MPC 2800 AT-C2 Mode D'emploi page 672

8. Appendix: SP Mode Tables
There are 8 digits in this SP.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [0 to 5]
4th digit: The day of the week. [0 to 7 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
The 7th and 8 digits must be set to "00".
• The digits are counted from the left.
• Make sure that SP5-307-1 is set to "1".
[Access Control]
5401
When installing the SDK application, SAS (VAS) adjusts the following settings. DFU
Default Document ACL
Whenever a new login user is added to the address book in external certification mode
(for Windows, LDAP, RDH), the default document ACL is updated according to this SP
setting.
[0 to 3 / 0 / 1]
103
0: View
1: Edit
8
2: Edit/Delete
3: Full control
Note: This SP setting is ignored on a machine that is not using document server.
Extend Certification Detail
162
Selects the log out type for the extend authentication device.
200 SDK1 Unique ID
201 SDK1 Certification Method
210 SDK2 Unique ID
211 SDK2 Certification Method
220 SDK3 Unique ID
304
*CTL
Bit 0: Log-out without an IC card
*CTL 0: Not allowed (default)
1: Allowed
*CTL
*CTL
"SDK" is the "Software Development Kit". This
*CTL
data can be converted from SAS (VAS) when
installed or uninstalled. (DFU)
*CTL
*CTL