Ricoh MPC 2800 AT-C2 Mode D'emploi page 471

No. Type
A necessary font is not found in the SD card.
• A necessary font is not found in the SD card.
D
• The SD card data is corrupted.
Check that the SD card has the correct data.
No. Type
Software performance error
The software makes an unexpected operation.
• Defective software
• Defective controller
CTL
• Software error
990
D
1. Turn the main switch off and on.
2. Reinstall the controller and/or engine main firmware.
• See Note 1 at the end of the SC table.
No. Type
Software continuity error
The software has attempted to perform an unexpected operation. However, unlike
SC 990, the object of the error is continuity of the software.
CTL
991
C
• Software program error
• Internal parameter incorrect, insufficient working memory.
This SC is not displayed on the LCD (logging only).
No. Type
Undefined error
CTL
992 Defective software program
D
• An error undetectable by any other SC code occurred
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC Tables
3
103