Ricoh MPC 2800 AT-C2 Mode D'emploi page 687

Proxy Port Number
This SP sets the port number of the proxy server used for communication between the
embedded RCG-N and the gateway. This setting is necessary to set up the embedded
064
• This port number is customer information and is not printed in the SMC report.
Proxy User Name
This SP sets the HTTP proxy certification user name.
065
• The length of the name is limited to 31 characters. Any character beyond the 31st
character is ignored.
• This name is customer information and is not printed in the SMC report.
Proxy Password
This SP sets the HTTP proxy certification password.
066
• The length of the password is limited to 31 characters. Any character beyond the 31st
character is ignored.
• This name is customer information and is not printed in the SMC report.
CERT: Up State
Displays the status of the certification update.
0 The certification used by RCG-N is set correctly.
The certification request (setAuthKey) for update has been received from the GW
1
URL and certification is presently being updated.
The certification update is completed and the GW URL is being notified of the
067
2
successful update.
3 The certification update failed, and the GW URL is being notified of the failed update.
The period of the certification has expired and new request for an update is being
4
sent to the GW URL.
A rescue update for certification has been issued and a rescue certification setting
11
is in progress for the rescue GW connection.
System Service Mode
8
319