Ricoh MPC 2800 AT-C2 Mode D'emploi page 579

007 Paper Transfer: 1st Side: S4
008 Paper Transfer: 2nd Side: S4
009 Paper Transfer: 1st Side: S5
010 Paper Transfer: 2nd Side: S5
[Thick 2: Leading Edge Correction] Thick 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2553 and SP2558 are multiplied by these SP values.
2571
• The paper leading edge area can be adjusted with SP2572.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2551 is multiplied by these SP values.
2571
• The paper leading edge area can be adjusted with SP2572.
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 2: Switch Timing: Lead. Edge]
2572
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
275 mm ≥ S3 size ≥ 210 mm (Paper width)
[100 to 600 / 120 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper width)
[100 to 600 / 430 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper width)
[100 to 600 / 140 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
[100 to 600 / 600 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2mm/step]
*ENG
System Service Mode
8
211