Ricoh MPC 2800 AT-C2 Mode D'emploi page 554

8. Appendix: SP Mode Tables
006 Execute: Low: M
007 Execute: High: C
008 Execute: Medium: C
009 Execute: Low: C
010 Execute: High: Y
011 Execute: Medium: Y
012 Execute: Low: Y
2184 [Main Scan Length Detection Target] DFU
001 Execute: Bk
002 Execute: M
003 Execute: C
004 Execute: Y
[Main Scan Length Detection Disp.]
8
Displays/adjusts the target value for the main scan magnification correction of the line
position adjustment.
2185
After replacing the laser optics housing unit, input the standard value for Bk provided with
the new unit. For details, see "Laser Optics Housing Unit" in the "Replacement Adjustment"
section. It is not necessary to input the values for the other colors; these are automatically
adjusted after doing the line position adjustment.
001 Bk
002 M
003 C
004 Y
2186 [Main Scan Length Detection] DFU
001 Selection
186
-
-
-
-
-
-
-
-
-
Executes the target value for the main scan length
detection.
-
-
*ENG
*ENG
[0 to 266667 / 249449 / 1 sub-dot/step]
*ENG
*ENG
[0 or 1 / 1 / 1/step]
*ENG
0: OFF, 1: ON