Mr Conditional System Description - Boston Scientific ImageReady Mode D'emploi

MR Conditional System Description

MR Conditional System Description
The following table lists model numbers of components that may comprise an MR Conditional Precision
Spectra System.
Warning: The Precision Spectra™ SCS System can be "MR Conditional" only when exposed to the
MRI environment under the specific conditions defined in this manual.
Table 1. Components that are eligible for Precision Spectra System with ImageReady™ MRI
Technology
Component
Precision Spectra Implantable Pulse Generator
IPG Port Plugs
Linear™ Leads, 30 cm and 50 cm only
Linear ST Leads, 30 cm and 50 cm only
Linear 3-4 Leads, 50 cm only
Linear 3-6 Leads, 50 cm only
Artisan™ Surgical Paddle Leads, 50 cm only
CoverEdge™ 32 Surgical Paddle Leads, 50 cm only
CoverEdge X 32 Surgical Paddle Leads, 50 cm only
Clik™ Anchor
Clik™ X Anchor
Silicone Suture Sleeves
Med-A
Note: Leads should be connected directly to the IPG, no extension, splitters and adapters are allowed.
Patient ID card
Advise the patient to bring the most up-to-date patient ID card to all MRI appointments. MRI personnel can
then use the patient ID card to identify Boston Scientific as the manufacturer of the patient's spinal cord
stimulator system and to confirm the model number of the implanted IPG and Leads.
Obtain the latest MRI guidelines labeling
Always obtain the latest MRI guidelines. Refer to the contact information at the back of this manual, or go
to www.controlyourpain.com/dfu. This manual may be updated from time to time. The www.controlyourpain.
com/dfu website has the latest version of this manual.
ImageReady™ MRI Guidelines for Precision Spectra™ Spinal Cord Stimulator System
91061672-02 Rev A 2 of 397
Model Number(s)
SC-1132
SC-4401
SC-2158-30, SC-2158-50
SC-2218-30, SC-2218-50
SC-2352-50
SC-2366-50
SC-8216-50
SC-8336-50
SC-8352-50
SC-4316
SC-4318
Not applicable, included in the lead kit.
SC-4320