Publicité
Specification of high-performance vector convertor
For example: P1-00, change parameters in the user mode, the display is as cP1-00
PP-04
Setting range
Whether the user function code parameter setting can be modified to prevent the risk of function parameters are mistakenly
altered.
The function code is set to 0, all the function codes can be modified; while set to 1, all the function codes are only view can
not be modified.
A0 Group --Torque control group and define parameters
Speed / torque control mode selection
A0-00
Setting range
For selecting inverter control mode: Speed control or torque control.
DI VFD multifunction digital terminals, and has two functions associated with torque control: Torque control
disabled (function 29), speed control / torque control switching (function 46). These two terminals keep A0-00 in
conjunction to achieve switching speed and torque control.
When the speed control / torque control switch terminal is invalid, the control mode is determined by the A0-00, if speed
control / torque control switch is active, the control mode is equivalent to the value of A0-00 negated.
In any case, when the torque control prohibition terminal is valid, inverter fixed speed control.
A0-01
A0-03
A0-01 torque setting is used to select the source, a total of 8 torque setting mode.
Torque setting using a relative value, corresponding to 100.0% inverter rated torque. Setting range -200.0% to 200.0%,
indicating that the inverter maximum torque is 2 times the rated drive torque.
When the torque setting by way of 1 to 7, communications, analog input, pulse input of 100% corresponds to A0-03.
A0-05
Function code to modify the
properties
0
1
0
1
Torque in torque control mode setting
source selection
Setting range
Torque number setting in torque control
mode
Setting range
Torque control positive maximum
Setting range
Factory default
Factory default
Factory default
0
1
2
3
4
5
6
7
Factory default
-200.0%～200.0%
Factory default
0.00Hz ~ maximum frequency (P0-10)
- 139 -
Parameter description
0
Can be modified
Unmodifiable
0
Speed Control
Torque Control
0
Number setting (A0-03)
AI1
AI2
AI3
Pulse
Communication given
MIN (AI1, AI2)
MAX (AI1, AI2)
0
50.00Hz
Publicité
