Télécharger Imprimer la page

MSW Motor Technics MSW-FI-7500 Manuel D'utilisation page 274

Publicité

Specification of high-performance vector convertor
As shown in Figure 6-28, which swings by the PB-00 and PB-01 set, when PB-01 is set to 0 swing 0, then wobble does not
work.
output frequency Hz
Upper frequency of swing frequency
Center frequency Fset
Lower frequency of swing frequency
Run command
PB-00
Setting range
This parameter is determined by reference to the amount of swing.
0: relative to the center frequency (P0-07 frequency source), a variable-swing system. Swing with the center frequency (set
frequency) change.
1: Relative maximum frequency (P0-10), the system is constant swing, swing fixed.
PB-01
Kick frequency amplitude
PB-02
To determine the value of the swing and kick frequency value of this parameter.
When set to swing relative to the center frequency (PB-00 = 0), the swing AW = frequency source P0-07 × swing amplitude
PB-01. When set to swing with respect to the maximum frequency (PB-00 = 1), the maximum frequency swing AW = P0-
10 × swing amplitude PB-01.
Kick frequency amplitude of traverse run, the kick frequency relative to the frequency swing percentage, namely: kick
frequency = swing AW × kick frequency amplitude PB-02. If the swing amplitude relative to the center frequency (PB-00 =
0), the kick frequency is a variable value. As selected swing relative to the maximum frequency (PB-00 = 1), the kick
frequency is a fixed value.
Wobble operating frequency, maximum frequency and minimum frequency is bound by.
PB-03
Swing frequency range
+Aw
-Aw
Frequency of textile process
=Aw*P B-02
Acceleration
by time
Figure 6-28 Working diagram of frequency swing
Radiometric way swing
0
1
Wobble amplitude
Setting range
Setting range
Wobble cycle
Setting range
Aw=Fset*PB-01
摆频周期 三角波上升
Swing frequency period
时间
Triangle wave rise time
Factory default
corresponding to central frequency
Respect to the maximum frequency
Factory default
0.0%~100.0%
Factory default
0.0%~50.0%
Factory default
0.0s~3000.0s
- 129 -
Parameter description
time
Acceleration by
按减速时间
deceleration time
加速
0
0.0%
0.0%
10.0s

Publicité

loading