Publicité
Specification of high-performance vector convertor
Function and use of curve 3, please refer to the description of the curve 1.
PULSE minimum input
P4-28
Setting range 0.00kHz～P4-30
PULSE minimum input correspondence
P4-29
Setting range -100.00%～100.0%
PULSE maximum input
P4-30
Setting range P4-28～50.00kHz
PULSE maximum input correspondence
P4-31
Setting range -100.00%～100.0%
PULSE filtering time
P4-32
Setting range 0.00s～10.00s
This function code is used to set the relationship DI5 pulse frequency corresponding to the set between.
Pulse frequency inverter can only be entered through DI5 channel. Application and function curve of this group is
similar to 1, please refer to Note 1 of the curve.
AI curve selection
P4-33
Setting
range
The function code bits, ten, one hundred are used to select, analog input AI1, AI2, AI3 corresponding setting curve. 3
analog inputs can be selected in any of the five kinds of curve a.
Curve 1, curve 2, curve 3 are 2 point curve, set in P4 group function code, whereas curve 4 and curve 5 are 4 point
curve, you need to set the A8 group function codes.
This inverter standard unit provides two analog inputs, AI3 must be configured to use multi-function input and output
expansion card.
AI is below the minimum input setting
P4-34
Setting
range
The function code is used to set, when the analog input voltage is less than the set "minimum input", the corresponding
analog set how to determine.
Single digit
AI1 curve selection
1
Curve 1 (2 points, see P4-13 ~ P4-16)
Curve 2 (2 points, see P4-18 ~ P4-21)
2
3
Curve 3 (2 points, see P4-23 ~ P4-26）
Curve 4 (4 points, see A6-00 ~ A6-07)
4
Curve 5 (4 points, see A6-08 ~ A6-15)
5
Ten bit
AI2 curve selection (1 ~ 6, the same as above)
Hundred bit
AI3 curve selection (1 ~ 6, the same as above)
Single digit
AI1 lower than the minimum input settings select
Corresponding minimum input setting
0
1
0.0%
Ten bit
AI2 lower than the minimum input settings selected (0 ~ 1, above)
Hundred bit
AI3 lower than the minimum input settings selected (0 ~ 1, above)
- 93 -
0.00kHz
Factory default
0.0%
Factory default
50.00kHz
Factory default
100.0%
Factory default
0.10s
Factory default
Factory default
321
Factory default
Parameter description
000
Publicité
