Publicité
Specification of high-performance vector convertor
The first fault drive status
P9-37
P9-38
The first fault power-on time
P9-39
The first fault running time
P9-40
The first fault frequency
The first fault current
P9-41
P9-42
The first bus voltage failure
Input terminal status at fault first
P9-43
The first fault output terminal
P9-44
Fault protection action selection 1
P9-47
Setting range
Fault protection action selection 2
P9-48
Setting range
Fault protection action selection 3
P9-49
Setting range
Factory default
Single digit
0
1
2
Ten bit
Hundred bit
Thousand bit
Ten thousand bit
Communication Abnormal (Err16) (same unit)
Factory default
Single digit
0
1
2
Ten bit
0
1
Hundred bit
Thousand bit
Motor overheating (Err 25) (same with P9-47 unit)
Ten thousand bit
Running time arrival (Err26) (same with P9-47 unit)
Factory default
Single digit
User-defined fault 1 (Err27) (same with P9-47 unit)
Ten bit
User-defined fault 2 (Err28) (same with P9-47 unit)
Hundred bit
Power-on time is reached (Err29) (same with P9-47 unit)
Thousand bit
0
1
Decelerated to 7% of the rated motor frequency continues
2
to run, can not afford to load automatically returns to the
Ten thousand bit Runtime PID feedback loss (Err31) (same with P9-47 unit)
- 120 -
The same with
P9-17～P9-24
Motor overload (Err11)
Freewheel
Halt according to halt mode
Continue to run
Input phase (Err12) (same unit)
Output Phase (Err13) (same unit)
External fault (Err15) (same unit)
Encoder failure (Err20)
Freewheel
Switch to VF, press the stop mode
Switch to VF, continues to run
Abnormal function code reader (Err21)
Freewheel
Halt according to halt mode
Retention
Carrying out (Err30)
Freewheel
Halt according to halt mode
set frequency operation
Parameter description
00000
00000
00000
Publicité
