Publicité
Specification of high-performance vector convertor
count pulse
Set count
Specified counter relay
Figure 6-29 Set the number of values given and the specified value of the given diagram
PC Group--multi-section instructions and simple PLC function
Multi-stage instruction VFD than usual multispeed richer function, in addition to multi-speed function, but also can be
used as VF isolated voltage source and a given source of process PID. To this end, the relative values of dimensionless
multistage instruction.
Simple PLC function is different from the VFD user-programmable features, easy PLC can only be done on a simple
combination of multi-step instructions to run. And user-programmed functions to be richer and more useful, please refer to
the A7 group instructions.
PC-00
PC-01
PC-02
PC-03
PC-04
PC-05
PC-06
PC-07
PC-08
PC-09
PC-10
PC-11
PC-12
1
2
DI5
DO1
Multi-stage instruction 0
Setting range
Multi-stage instruction 1
Setting range
Multi-stage instruction 2
Setting range
Multi-stage instruction 3
Setting range
Multi-stage instruction 4
Setting range
Multi-stage instruction 5
Setting range
Multi-stage instruction 6
Setting range
Multi-stage instruction 7
Setting range
Multi-stage instruction 8
Setting range
Multi-stage instruction 9
Setting range
Multi-stage instruction 10
Setting range
Multi-stage instruction 11
Setting range
Multi-stage instruction 12
Setting range
3
4
5
6
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
Factory default
-100.0%～100.0%
- 131 -
Parameter description
7
8
9
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0Hz
0.0%
0.0%
Publicité
