Specification of high-performance vector convertor
4.3 Parameter display mode
Parameter display mode is mainly set for users to view functional parameters with different spread
patterns based on actual demand, and there are three parameter display modes.
Functional parameter mode
User-defined parameter mode
User-modified parameter mode
Related functional parameters are PP-02 and PP-03 as below:
Functional parameter mode
display property
PP-02
Defined parameter mode
display selection
PP-03
If defined parameter mode display selection (PP-03) exists to be one display, different parameter
display modes can be switched through QSM key.
Display code of each parameter display mode is as below:
Parameter display mode
Functional parameter mode
User-defined parameter mode
User-modified parameter mode
Name
Display functional parameters of frequency convertor in
order, including P0~PF, A0~AF, U0~UF functional parameter
User-defined functional parameters (define 32 parameters at
most), users can confirm functional parameters to be displayed
through PE group
Functional parameters being not consistent with factor default
Unit
0
1
Setting range
Decade A group display selection
0
1
Unit
0
1
Setting range
Decade User-modified parameter display selection
0
1
Description
Factory default
U group display selection
Not display
Display
Not display
Display
Factory default
User-defined parameter display selection
Not display
Display
Not display
Display
- 36 -
Operation and display
11
00
Display