Télécharger Imprimer la page

MSW Motor Technics MSW-FI-7500 Manuel D'utilisation page 155

Publicité

Specification of high-performance vector convertor
2.4 Technical specifications
Items
Highest frequency
Carrier frequency
Input frequency resolution
Control mode
Starting torque
Basic
Speed regulation range
functions
Speed stabilizing precision
Torque control precision
Overload capacity
Torque promotion
V/F curve
V/F separation
Acceleration/deceleration
curves
DC braking
Inching control
Simple PLC, multi-stage
velocity operation
Built-in PID
Automatic voltage regulation Keep constant output voltage automatically if any change of network
Overvoltage, overcurrent,
stalling control
Fast current-limiting function Reduce over-current fault, protect normal operation of convertor
Torque limit and control
Figure 2-2 Technical specifications of frequency convertor
Vector control: 0~300Hz
V/F control: 0~3200Hz
0.5kHz~16kHz
Adjust carrier frequency automatically based on load characteristic
Number setting: 0.01Hz
Simulation setting: highest frequency ×0.025%
SVC
FVC
V/F control
G-style machine: 0.5Hz/150% (SVC); 0Hz/180% (FVC)
P -style machine: 0.5Hz/100%
1: 100 (SVC)
±0.5% (SVC)
±5% (FVC)
G-style machine: 150% rated current at 60s; 180% rated current at 3s
P -style machine: 120% rated current at 60s; 150% rated current at 3s
Automatic torque promotion; manual torque promotes by 0.1%~30.0%
Three ways: linear type; multipoint type; N
(1.2 power, 1.4 power, 1.6 power, 1.8 power, 2 power)
2 ways: full separation, semi-separation
Linear or S-curve acceleration/deceleration way.
Four kinds of acceleration/deceleration time
Acceleration/deceleration time range: 0.0~6500.0s
DC braking frequency: 0.00Hz~maximum frequency; Braking time:
0.0s~36.0s braking action; Current value: 0.0%~100.0%
Inching frequency range: 0.00Hz~50.00Hz;
Inching acceleration/deceleration time 0.0s~6500.0s
Realize 16-stage velocity operation at most through built-in PLC or
control terminal
Easy to realize process control, closed-loop control system
voltage
Limit current/voltage automatically during operation, prevent frequent
tripping caused by over-current and over-voltage
" Nawy " character limit torque during operation,
prevent frequent overcurrent tripping, closed-loop
vector mode can realize torque control
Specifications
1: 1000 (FVC)
±0.02% (FVC)
- 12 -
Product information
power type V/F curve
th

Publicité

loading