Publicité
Specification of high-performance vector convertor
LED display stop parameters
Setting
range
P7-05
Load speed display coefficient
P7-06
When you need to display the load speed, this parameter, adjusting the correspondence between the output frequency and
load speed. Correspondence between specific reference P7-12 description.
Heat sink temperature of the inverter
P7-07
Display inverter module IGBT temperature.
Different models of inverter module IGBT overtemperature protection value is different.
Rectifier heatsink temperature
P7-08
Temperature display rectifier.
Different models of the rectifier overtemperature protection value is different.
P7-09
Displays the accumulated run time of the inverter. When running time reaches the set running time P8-17, the inverter multi-
function digital output (12) outputs ON signal.
0000
～
FFFF
Setting range
module
Setting range
Setting range
Total running time
Setting range
Factory default
Factory default
0.0001～6.5000
Factory default
0.0℃～100.0℃
Factory default
0.0℃～100.0℃
Factory default
0h～65535h
- 105 -
Parameter description
0
1.0000
0
0
0h
Publicité
