fischertechnik COMPUTING ROBO MOBILE SET 8 Mode D'emploi page 58

R M S A B
O B O O B I L E E T C T I V I T Y O O K L E T
GB+USA
will result. For this reason the little screws should always be tightened properly. Always make sure that
the screws don't come into contact with each other when plugging in the connectors.
Power Supply
If there are inexplicable interruptions during operation an almost empty battery pack might be the cause.
The voltage falls for a shot time when connecting a load (motor on). This causes a reset of the processor
on the Interface. When the red LED on the ROBO Interface lights up, the voltage of the power supply is
too low. This means the battery pack needs to be charged.
Programming Error
If errors occur in a program you have written yourself and you cannot find a way to explain them, it might
be a good idea to be on the safe side and load one of the supplied programs that comes closest to yours.
This way you will be able to rule out electrical or mechanical defects. During online mode you can follow
the program flow on your screen. If the program gets stuck at a certain point, then this is the place to
look for the cause. You might have selected an incorrect input or motor for example or maybe an
incorrect value is queried at a branch or a Y/N connection has been switched.
If none of this is successful, you can always contact fischertechnik service
(e-mail: info@fischertechnik.de).
Or visit our website at www.fischertechnik.de. There you will find a Forum, Chat, Market place, Gallery
and you can join the Fischertechnik Fan-Club for free.
We hope you'll have many hours of fun with the ROBO Mobile Set with plenty of surprises and sudden
insights.
5 5 6 6
5 5 6 6