Drain Bladder; Replace Saline; Remove Device; Export Procedure Record - Boston Scientific Rezum Manuel D'utilisation

Figure 22: Options Menu Choices

Drain Bladder

When 750ml of saline has been used, a message will be displayed to the physician to
drain the bladder. When this has occurred, select from the Options Menu, Drain Bladder.
A "Confirm Bladder Drain" dialog box shall appear when Drain Bladder is selected.
Select Confirm to confirm the physician has done so.
Figure 23: Drain Bladder Confirmation

Replace Saline

When saline is replaced, select the Replace Saline from the Options Menu and select
the appropriate size saline from the available options. The saline source volume will be
set to the previously selected value upon power up of the generator.
Figure 24: Replace Saline

Remove Device

From the Options Menu, select Remove Device. A "Confirm Syringe Release" dialog box
shall appear when Remove Device item is selected. If the user selects "Release", then
the syringe shall be released. If the user selects "Cancel", no action shall be taken.
Figure 25: Release Syringe
If the Delivery Device is primed and a release syringe operation occurs, then the
Delivery Device shall require re-priming before treatments can be resumed.
After the device is removed, procedure summary will be displayed. From this screen,
procedure summary and options to continue, complete or export are available.
Figure 26: Procedure Summary

Export Procedure Record

Caution: Only approved equipment and accessories shall be connected to the generator.
Caution: The Rezūm™ Generator USB port is only intended for use by authorized
service personnel or to export treatment data.
This option is used to export selected procedure records. Therapy information can be
exported to a USB memory stick.
Touch the desired folder to select the location on the USB drive to export the procedure
records. Touch Save to export the procedure records.
Figure 27: Export Procedure Records
11
Black (K) ∆E ≤5.0