Extension Case/Lower Rubber Mount - Honda BF40D Manuel D'utilisation

11. EXTENSION CASE/LOWER RUBBER MOUNT

1 a. DISASSEMBLY
Remove the following parts.
- Engine cover (P. 4-2)
2
- Gear case assembly/extension separator [Semi-long/extra-long shaft types only] (P. 11-3)
1) Remove the six 8 x 15 mm rivet screws, 5 x 45 mm screw, 5 x 30 mm screw, 5 x 7 x 38 mm distance collar, 5 x 7 x
3
23 mm distance collar, two 5 mm washers and the two 5 mm plate nuts. Remove the under cover from the extension
case.
4
2) Remove the 6 x 35 mm special screw, and remove the drain plug cover and the 6 x 10.5 x 25 mm distance collar from
the extension case.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
[11]
19
DRAIN PLUG COVER
20
[10]
6 x 10.5 x 25 mm
DISTANCE COLLAR
11-48
[1]
5 x 45 mm SCREW
[2]
5 x 7 x 38 mm
DISTANCE COLLAR
[8]
5 x 30 mm SCREW
[9]
6 x 35 mm SPECIAL
SCREW
316
[3]
5 mm PLATE NUT (2)
[4]
8 x 15 mm RIVET
SCREW (6)
[5]
UNDER COVER
[6]
5 x 7 x 23 mm
DISTANCE COLLAR
[7]
5 mm WASHER (2)