Alternator/Timing Belt - Honda BF40D Manuel D'utilisation

2. ALTERNATOR/TIMING BELT

1 a. REMOVAL
Remove the following parts.
- Engine cover (P. 4-2)
2
- Alternator cover (P. 7-2)
- Electric part cover (P. 18-19)
3
1) Turn the alternator rotor counterclockwise to bring the
4
No.1 cylinder piston to the top dead center of its
compression stroke (P. 3-10).
5
NOTICE
Be sure to turn the alternator rotor in the direction shown
6
with the arrow. Never turn it in the opposite direction.
7
8
2) Remove the two 8 x 18 mm flange bolts, and remove the
9
engine hanger.
3) Remove the timing belt tensioner cap from the timing belt
tensioner.
10
11
12
13
14
15
16
17
4) Set the special tool to the engine hanger mounting part.
Install the two 8 x 18 mm flange bolts (engine hanger
18
mounting bolts) securely and secure the special tool.
19
• Check that the special tool is set on the ring gear securely.
20 TOOL:
Ring gear holder
7-3
[2]
ARROW
[2]
TIMING BELT
TENSIONER CAP
[1]
TIMING BELT
TENSIONER
[1]
RING GEAR HOLDER
07LPB-ZV30100
07LPB-ZV30100
22
[1]
ALTERNATOR ROTOR
8 x 18 (2)
[3]
ENGINE
HANGER
8 x 18 (2)