Honda BF40D Manuel D'utilisation page 686

12) Install the M-bushing on the brush.
13) Apply adhesive agent (Cemedine #575 or equivalent) to the
rear bracket installation groove in the M-bushing.
14) Install the rear bracket and tighten the two 4 mm screws
securely.
15) Tighten the two through bolts securely.
16) Set the 8 mm washer and the 8 mm spring washer on the
rear bracket, and tighten the 8 mm hex nut securely.
18-14
[1]
REAR BRACKET
[6]
BRUSH
[5]
M-BUSHING
[1]
REAR BRACKET
[4]
8 mm
WASHER
[3]
8 mm HEX NUT
686
[2]
THROUGH BOLT (2)
[3]
4 mm SCREW (2)
[4]
GROOVE
[2]
8 mm SPRING
WASHER