Honda BF40D Manuel D'utilisation page 590

26) Remove the throttle cable pin from the throttle cable pivot.
Loosen the 5 mm hex nut of the throttle cable pivot, and
remove the throttle cable pivot, 5 mm hex nut and rod
1
grommet from the throttle rod.
2
3
4
5
6
27) Remove the two 5 x 14 mm screws and remove the lock plate.
Remove the two 5 x 14 mm screws, and remove the spring guide, spring, shift arm pin and the roller.
7
28) Remove the shift gear and the bushing from the shift frame.
8
9
10
11
12
13
[2]
ROLLER
14
15
[1]
SHIFT GEAR
16
17
18
19 [9]
BUSHING
20
16-16
[4]
SPRING
[3]
SHIFT ARM PIN
[8]
SHIFT FRAME
[1]
[2]
THROTTLE
5 mm HEX NUT
CABLE PIN
[5]
THROTTLE
CABLE PIVOT
[5]
5 x 14 mm SCREW (2)
590
[3]
THROTTLE
ROD
[4]
ROD GROMMET
[6]
LOCK PLATE
[7]
SPRING GUIDE
[5]
5 x 14 mm
SCREW (2)