Cylinder Head Cover Removal - Honda BF40D Manuel D'utilisation

1. CYLINDER HEAD COVER REMOVAL

Remove the following parts.
1
- Engine cover (P. 4-2)
- Alternator cover (P. 7-2)
2
- Ignition coil/regulator/rectifier (P. 18-23)
3
1) Remove the main wire harness from the recess in the
cylinder head cover.
4 Remove the breather tube from the cylinder head cover.
5
6
7
8
2) Remove the fuel strainer (low pressure side) and the
9
strainer suspension as a set from the fuel strainer stay.
Remove the two 6 x 14 mm flange bolts, and remove the
fuel strainer stay from the cylinder head cover.
10
11
12
13
14
15
16
17
3) Remove the oil tube from the cylinder head cover.
18
19
20
9-2
[1]
RECESS
[5]
MAIN WIRE
HARNESS
[4]
TUBE CLAMP D17
[2]
FUEL STRAINER STAY
6 x 14 (2)
[1]
FUEL STRAINER
(LOW PRESSURE
SIDE)
[1]
CYLINDER HEAD COVER
[3]
TUBE
CLAMP D21
[2]
OIL TUBE
90
[2]
CYLINDER HEAD COVER
[3]
BREATHER TUBE
[3]
STRAINER SUSPENSION