Remote Control Cable/Grommet - Honda BF40D Manuel D'utilisation

1. REMOTE CONTROL CABLE/GROMMET

1 a. REMOVAL
• Move the shift to the "N" (Neutral) position before removing
the remote control cables/grommet.
2
1) Remove the engine cover (P. 4-2).
3
2) Remove the two 6 x 28 mm flange bolts, two 6 x 40 mm hex
4
bolts and the two 6 mm washers, and remove the separate
case.
5
6
7
8
9
10
11
12
3) Remove the handle cable 14P connector and the handle
13
cable 6P connector from the main relay bracket, and
disconnect the handle cable 14P connector and the 6P
14
connector [Tiller handle type only].
15
Remove the remote control cable A 14P connector and the
indicator wire 6P connector from the main relay bracket,
16 and disconnect the 14P connector and the 6P connector
[Remote control type only].
17
18
19
20
17-2
6 x 28 (2)
[2]
6 mm
WASHER (2)
[3] 6 x 40 mm HEX
BOLT (2)
[1]
HANDLE CABLE 14P CONNECTOR
[TILLER HANDLE TYPE ONLY]
REMOTE CONTROL CABLE A
14P CONNECTOR
[REMOTE CONTROL TYPE ONLY]
[3]
HANDLE CABLE 6P CONNECTOR
[TILLER HANDLE TYPE ONLY]
INDICATOR WIRE
6P CONNECTOR
[REMOTE CONTROL TYPE ONLY]
640
[1]
SEPARATE
CASE
[2]
MAIN RELAY
BRACKET