Honda BF40D Manuel D'utilisation page 384

d. SWIVEL CASE ASSEMBLY DISASSEMBLY
1) Remove the 39 mm external circlip from the mount frame.
2) Mark the mount frame so it aligns with the "
lower mount center housing.
3) Warm up the lower mount center housing using a dryer or
equivalent tool.
Wear the gloves to warm up the lower mount center
housing.
4) Drive out the mount frame from the lower mount center
housing using the special tools as shown.
TOOLS:
Driver
Bearing driver attachment, 37 mm
13-19
[1]
MOUNT FRAME
[2]
39 mm
EXTERNAL
CIRCLIP
" mark on the
[1]
" " MARK
07749-0010000
07ZMD-MBW0200
[2]
DRIVER
07749-0010000
[5]
LOWER MOUNT
CENTER HOUSING
384
[2]
MARK
[1]
LOWER MOUNT
CENTER HOUSING
[3]
BEARING DRIVER
ATTACHMENT,
37 mm
07ZMD-MBW0200
[4]
MOUNT
FRAME