Honda BF40D Manuel D'utilisation page 76

17) Turn the alternator rotor further counterclockwise until the
pulser rotor turns by three ridges of the gear teeth.
1
2
3
4
5
6
7
8
18) Tighten the 10 x 38 mm flange bolt on the timing belt
9
tensioner to the specified torque.
TORQUE: 45 N . m (4.6 kgf . m, 33 lbf . ft)
10
• The timing belt tensioner is automatically adjusted. Do
11
not push the tensioner toward the belt by hand.
12
19) Perform timing belt tension adjustment (P. 3-24).
20) Install the following parts.
13
- Timing belt tensioner cap, engine hanger (P. 7-21)
- Electric part cover (P. 18-19)
14
- Alternator cover (P. 7-2)
- Engine cover (P. 4-2)
15
16
17
18
19
20
7-30
[1]
TIMING BELT
TENSIONER
76
[1]
PULSER ROTOR
10 x 38