Installing The Optional Patient Control Pendant - Stryker InTouch Critical Care Bed Manuel D'exploitation

Installing the optional patient control pendant

WARNING
Always adjust the scale or bed exit system if an option is added while the scale or bed exit system is armed.
The optional patient control pendant allows the patient to control product motion and other InTouch features.
Tools required: None
To install the optional patient control pendant onto InTouch:
1. Slide the pendant into the molded pendant holder inside the foot end siderail handle (A)
113).
2. Plug the pendant cable connector into the pendant connector that is located behind the foot end siderail (B)
1-134 on page 1-113).
With motion control, nurse call, and smart TV
(FA64225)
With motion control and smart TV (FA64227)
www.stryker.com
Accessories
Figure 1-134: Installing the optional patient pendant
Optional patient control pendants
2141-800-1 07 REV A
(Figure 1-134 on page 1-
A
B
With motion control and nurse call (FA64226)
With motion control (FA64228)
English
EN
(Figure
1-113