Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Enabling or disabling lockouts
Lockouts can lock out product motion input from the motion control panel, footboard control panel, and head end control
panel (optional). The brake control panel, Bed Exit, scale, and optional nurse call features are still available.
Note: Locks change from blue (deactivated) to amber (activated) when tapped.
•
To perform a total lockout, tap (A)
•
To lock the bed height, tap (B)
•
To lock a specific litter section, tap the corresponding lock (C, D, or E)
•
To lock all bed controls, tap (F)
•
To lock all the patient controls, tap (G)
fowler lock, and gatch lock options to appear.
Notes
•
If the product is held in a specific position when a lock is enabled, the product will be locked in that position.
•
The Locks Enabled LED illuminates amber on the footboard control panel whether one lock or a total lockout is set.
•
Lock parameters are saved when the product is unplugged, or during a power failure.
•
Do not lock the control panel functions from the footboard if you must access the control panel functionality when
you remove the footboard.
www.stryker.com
Operation
(Main menu: Lockouts on page
(Main menu: Lockouts on page
(Main menu: Lockouts on page
(Main menu: Lockouts on page
2141-800-1 07 REV A
1-86).
1-86).
(Main menu: Lockouts on page
1-86). This allows all lockout options to appear.
1-86). This allows only the total lockout,
English
EN
1-86).
1-87
Publicité
Chapitres
Table des Matières
