Viewing The Wi-Fi Connection Status (Optional); Resetting The Wi-Fi Connection - Stryker InTouch Critical Care Bed Manuel D'exploitation

English

Viewing the Wi-Fi connection status (optional)

EN
Note: iBed Wireless must be installed and configured in order to view this option.
To view the Wi-Fi connection status, tap Wi-Fi (see
menu: Options on page
icon at the bottom of the touch screen.
Wi-Fi ON displays the connection status of the wireless
network.
To configure the Wi-Fi option, see the InTouch
maintenance manual.
To return to the Options screen, tap Back
on page 1-84).

Resetting the Wi-Fi connection

When the Wi-Fi connection is lost and cannot reconnect
to the network, you must reset the Wi-Fi connection.
To reset the Wi-Fi connection , tap Reset
page 1-84).
Notes
• After you reset, InTouch reboots to the Patient
Information screen
1-40).
• The settings for lockout controls, scale calibration
data, bed exit, and iBed
when you reset the product.
• The settings for Isolibrium patient information and
patient weight are preserved when you reset the
product.
• The settings for Protocol Reminders are lost when
you reset the product.
To cancel the request, tap Cancel
1-84).
1-84
Operation
Main
1-76) or tap the Wi-Fi connectivity
(Figure 1-95
(Figure 1-96 on
(1-19 Patient informationon page
® Awareness are preserved
(Figure 1-96 on page
2141-800-1 07 REV A
Figure 1-95: Wi-Fi Connection Status
Figure 1-96: Resetting the Wi-Fi connection
www.stryker.com