Clearing And Entering New Patient Information - Stryker InTouch Critical Care Bed Manuel D'exploitation

Clearing and entering new patient information

Clear all previous product parameters and patient history
before placing a new patient onto InTouch.
To enter new patient information, tap New
on page 1-40).
To clear previous product parameters and patient history:
1. Tap the option that you want to clear.
Note: Options change from blue (deactivated) to
green (activated) when tapped.
2. Tap Ok.
To enter a new Patient ID:
1. Tap the pencil (Figure 1-20 on page
2. Enter the Patient ID.
3. Tap Ok.
www.stryker.com
Operation
(Figure 1-19
1-41).
2141-800-1 07 REV A
Figure 1-20: New patient
English
EN
1-41