Arming Or Disarming Chaperone Bed Exit - Stryker InTouch Critical Care Bed Manuel D'exploitation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Arming or disarming Chaperone Bed exit

®
When armed, Chaperone
Bed Exit monitors the patient's position on the product.
Note: A notification appears if there is not enough weight on the product to arm bed exit.
To arm bed exit:
1.
Tap the desired zone (see
2.
Tap Arm (D) (see
Main menu: Chaperone Bed exit on page
After arming bed exit, the LED light bars on the outside siderails and footboard illuminate green, the bed exit indicator
LED on the footboard control panel illuminates, and the selected zone in the Bed exit screen is highlighted green.
If the patient moves from the armed zone and compromises the bed exit parameter, the LED light bars on the outside
siderails and footboard flash amber, the bed exit indicator LED on the footboard control panel flashes, a sound alarm is
triggered, the compromised zone is highlighted red, and the Event Manager screen appears
).
Note: If InTouch is equipped with the optional iAudio feature, voice alarms are available. Voice alarms replace the
buzzer alarm and play through the inside siderail speakers.
To disarm bed exit, tap Disarm.
www.stryker.com
Operation
Main menu: Chaperone Bed exit on page
2141-800-1 07 REV A
1-50).
1-50).
(Figure 1-101 on page 1-91
English
EN
1-51

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fl2721312141

Table des Matières