Applying Or Releasing The Electric Brakes; Transporting Intouch With Steer Lock (Model 2131) - Stryker InTouch Critical Care Bed Manuel D'exploitation

English

Applying or releasing the electric brakes

EN
WARNING
• Always keep feet clear from the area above the base cover or below the base cover when lowering the product or
when applying the brakes or releasing the brakes.
• Always apply the brakes when a patient is getting in the product or out of the product to avoid instability.
• Always apply the brakes when the patient is unattended.
• Do not apply the brake to slow or stop the product while it is in motion.
The electric brakes are available on the brake control panel (see
footboard control panel (see
control panel (optional) on page
To apply the electric brakes, press Brake.
Note: The Brake button and Brake Set LED illuminate when you apply the brakes.
To release the electric brakes, press N/Brake Off.
Note: The N/Brake Off button and Brake Not Set LED illuminate when you release the brakes.
Note: If you set the brakes electronically, they can be released manually.

Transporting InTouch with steer lock (Model 2131)

WARNING
Always lock the siderails in the full up position with the sleep surface horizontal in the lowest position when transporting a
patient.
The steer lock function locks both of the foot end casters for better tracking of the product when transporting a patient.
The steer lock function is available on the brake control panel (see
footboard control panel (see
control panel (optional) on page
To transport InTouch with steer lock, press D/Drive.
To release steer lock, press N/Brake Off.
1-22
Operation
Footboard control panel on page
1-36).
Footboard control panel on page
1-36).
2141-800-1 07 REV A
Brake control panel (outside siderail) on page
1-37), or head end control panel (optional) (see
Brake control panel (outside siderail) on page
1-37), or head end control panel (optional) (see
1-34),
Head end
1-34),
Head end
www.stryker.com